@article{10.1063/5.0242516,

title = {The fabrication of PVP/NiAc nanofiber as a QCM active layer for hazardous vapor detection},

author = {Riris Sukowati and Yadi Mulyadi Rohman and Bertolomeus Haryanto Agung and Aan Priyanto and Dian Ahmad Hapidin and Khairurrijal Khairurrijal},

url = {https://doi.org/10.1063/5.0242516},

doi = {10.1063/5.0242516},

issn = {0094-243X},

year  = {2025},

date = {2025-02-20},

urldate = {2025-01-01},

journal = {AIP Conference Proceedings},

volume = {3197},

number = {1},

pages = {020002},

abstract = {The detection of hazardous vapors is crucial for controlling their pollution in the environment. The Quartz crystal microbalance (QCM) stands out as a high-performance sensing device that features high sensitivity, simplicity, low cost, and the ability to operate at room temperature. In this study, a QCM has been coated with a new active layer of PVP/NiAc composite nanofibers to detect hazardous vapor. The QCM surface is coated with PVP/NiAC nanofiber which is fabricated using the electrospinning method. The morphology and average diameter of PVP/NiAc composite nanofibers were investigated utilizing an optical microscope and ImageJ software, respectively. The developed composite nanofibers have an average diameter of 989 ± 172.61 nm. The fabricated sensor was tested against methanol, acetone, dimethylacetamide (DMAc), and formaldehyde vapors in different concentrations ranging from 5.0 to 22.5 ppm. The sensitivities of QCM sensors with PVP/NiAc nanofiber active layer were 2.35, 0.62, 0.32, and 0.29 Hz/ppm for methanol, formaldehyde, acetone, and DMAc, respectively. The developed sensor performed the highest sensitivity and frequency shift response in detecting methanol vapors. Furthermore, the adsorption phenomena were investigated by adapting several adsorption models, including Scatchard, Freundlich, Langmuir, and Langmuir–Freundlich, to validate the physical adsorption affinity. In conclusion, the QCM sensors based on PVP/NiAc composite nanofibers can be a considerable way to detect hazardous vapors, especially methanol, in various sensing applications.},

keywords = {Electrospinning, Nanofiber, openQCM, Physisorption, Quartz Crystal Microbalance},

pubstate = {published},

tppubtype = {article}

}

@article{ermek2023electrospun,

title = {Electrospun biotin-and streptavidin-coated quartz crystal microbalance surfaces: characterization and mass sensing performance using OpenQCM},

author = {Erhan Ermek and Esra Ayan and Nurettin Tokay and Hasan DeMirci and Abdullah Kepceoğlu},

url = {https://www.researchsquare.com/article/rs-2995721/v1},

doi = {https://doi.org/10.21203/rs.3.rs-2995721/v1},

year  = {2023},

date = {2023-06-06},

urldate = {2023-06-06},

abstract = {In this study, a quartz crystal microbalance (QCM) sensor surface was coated with biotin and/or streptavidin using the electrospinning method. The coated surfaces were analyzed using the Raman spectroscopy method. QCM measurements were carried out using the OpenQCM platform. The results indicate that the electrospinning method can be used to coat QCM surfaces with biotin and/or streptavidin and that the coated surfaces exhibit distinct morphological and spectroscopic properties. The QCM measurements showed that the coated surfaces are highly sensitive to changes in mass, indicating their potential for use in biosensing applications. Overall, this study provides new insights into the use of QCM sensors coated with biotin and/or streptavidin for biological sensing and detection applications.},

keywords = {Biosensing, Biotin, Electrospinning, openQCM, QCM, Quartz Crystal Microbalance, Raman spectroscopy, Streptavidin, Surface coating},

pubstate = {published},

tppubtype = {article}

}