Tag Archives: tech specs

openQCM NEXT Tech Specs

openQCM NEXT

Physical quantities: Frequency and Dissipation
Measurement mode: Simultaneous multi - overtones (up to 9th @ 5 MHZ)
Minimum Sampling time: ~ 125 ms for each harmonic
Frequency sensitivity: ± 1 Hz
Dissipation sensitivity: ~ 0.1 x 10-6

Nominal working range: 15 °C - 45 °C
Control direction: Heating and Cooling
TEC element: Peltier

Number of sensors: Single
Sensor frequencies: 5 MHz and 10 MHz
Blank diameter: 14mm
Contact electrodes: Wrapped (Single side contact)

Default Fluidic module material: Nichel electroplating Stainless steel (top cover exposed to the sample) , Flash chrome plating Aluminium (bottom)
Fluidic module window material: Quartz glass, Viton (FKM) oring and PTFE sealing
Heat sink material: Flash chrome plating Aluminium
Main case material: Aluminum 6061 and Nylon plastic PA2200
Main Dimension: (L x W x H): 20 x 8 x 4 cm
Fluidic module dimensions: (L x W x H): 2.5 x 2.5 x 0.5 cm
Weight: 260 g

Main electronics: USB 5VDC powered (cable included)
Peltier module: 5 VDC through 220/110 VAC adaptor (adaptor 220VAC - 5VDC USB included)

Control unit core: Teensy 4.0 based on ARM Cortex-M7 at 600 MHz, Float point math unit, 64 & 32 bits 1984K Flash, 1024K RAM (512K tightly coupled) 1K EEPROM (emulated)Stainless steel, aluminum
Programming language: C++ arduino - language based code

openQCM – Powered by Novaetech S.r.l

COOKIES & PRIVACY POLICY

openQCM by https://openqcm.com is licensesd under a Creative Commons

Attribution-Non Commercial-ShareAlike 4.0 International License.

openQCM Wi2 Tech Specs

openQCM Wi2

Dimensions: 66 x 50 x 26 mm
Weight: 43 g
Case Material: Nylon

Materials: PMMA or PTFE
Other materials: upon request
14 mm internal volume: 50 µL
25.4 mm internal volume: 200 µL (above the sensor)
O-ring: FKM

Materials: PMMA or PTFE
Other materials: upon request
Sample volume: range from 10 μl to 100 μl
O-ring: FKM

openQCM – Powered by Novaetech S.r.l

COOKIES & PRIVACY POLICY

openQCM by https://openqcm.com is licensesd under a Creative Commons

Attribution-Non Commercial-ShareAlike 4.0 International License.

openQCM Q-1 Tech Specs

openQCM Q^-1

Dimensions: 143.1 x 66.8 x 26 mm
Weight: 50 g
Case Material: Nylon

Materials: PMMA or PTFE
Other materials: upon request
14 mm internal volume: 50 µL
25.4 mm internal volume: 200 µL (above the sensor)
O-ring: FKM

Materials: PMMA or PTFE
Other materials: upon request
Sample volume: range from 10 μl to 100 μl
O-ring: FKM

Standard Quartz Frequencies: 5 MHz and 10 MHz
Maximum Quartz Frequency: compatible with DDS Frequency output range (50 MHz)
Hosting diameter: 14 mm and 25.4 mm (1 inch)
Electrodes configuration: single side contact
Quartz sensors contacts: pogo-pin
Overtones Capability: YES (see measurement specs)

Frequency Monitoring: YES
Frequency Resolution: 1 Hz (minimum)
Dissipation Monitoring: YES
Dissipation Resolution: 10^-6 (minimum)
Overtones Analyses: YES
Overtones for 5 MHz quartz: up to 9^th overtone
Overtones for 10 MHz quartz: up to 5^th overtone
Measurement Mode: air, static liquid and flow liquid

Power Supply: 5 VDC
Electrical Connection: USB

AD9851 - DDS/DAC Synthesizer
DDS Frequency Output Range: DC to 51 MHz
DDS Clock Rate: 120 MHz
DDS Voltage Supply: 3.3 VDC
AD8302: RF/IF Gain and Phase Detector
Input Frequency Range: 0 - 2700 MHz
Gain Measurement Range: ± 30 dB
Phase Measurement Range: ± 90 Degree
Supply Voltages: from 2.7 V – 5.5 V
AD5252 Dual 256-Pos Digital Potentiometer
Resistance: 1 kOhm
I2C-compatible serial interface
Single supply 2.7 V to 5.5 V

Teensy 3.6 dev board
Processor: MK66FX1M0VMD18
Core: Cortex-M4F
Rated Speed: 180 MHz
Digital I/O: 58 pins
Voltage Input: 3V3 only (not 5VDC tolerant)
Analog Input: 25 pins
Analog Bits Usable Resolution 13 Bits
USB Communication
I2C Communications: 4 Pins
Serials UART: 6
Programming Language: Arduino Compatible

openQCM – Powered by Novaetech S.r.l

COOKIES & PRIVACY POLICY

openQCM by https://openqcm.com is licensesd under a Creative Commons

Attribution-Non Commercial-ShareAlike 4.0 International License.